Autonomous siren IRIS PLUS/GWH

Specifications:

Acoustic Power:122db
Foam-vibration detector:No
Chrome plated cover:No
Box: Polycarbonate
Bus connection: No
Siren Type: Magnetodynamic
Colour: Grey 
Flash Color: Transparent

Autonomous, gray GRADE 3 siren with white LED Flash.
Acoustic power 122dB at 1m.
Battery short circuit protection.
Negative or positive trigger input.
The installation of the siren can be completed without power from the panel and remain so for quite some time.
Fire detection input with different sound.
Alarm input with five different sounds, which is activated by the application or interruption of positive or negative voltage.
Select a low sound volume when starting the siren, which then rises to the normal level.
Possibility to limit the operation of the siren up to 5 alarms in a twenty-four hour period.
TAMLER to protect against the opening of the outer casing or the detachment of the siren from the wall.
Built-in FLASH with five LEDs of high brightness and low consumption, with short circuit protection.
Seven different operating modes of FLASH in stand by mode.
The FLASH continues to operate for thirty minutes after the alarm has ended, for easy identification of the area that gave the alarm.
LOW BATTERY output, which is activated in the event that the voltage of the battery or the siren's power supply drops below 11.5 V.
ALARM VERIFICATION output, which is activated every time the loudspeaker sounds, regardless of the reason for activation.
ALARM TAMPER output, which is activated in every sabotage attempt.
SIGNAL input, with selectable visual or acoustic confirmation of panel arming or disarming.
Changing the battery and servicing the siren can be done without it sounding, with a very smart, automated process.
Box with 4 mm thick Polycarbonate outer casing.
Metal cap inside the siren for greater safety.
All programming is done through buttons, located on the siren board.
Accepts a 12V/2.3Ah battery.
Dimensions: 348 x 246 x 69 mm